Zortrax Apoller SVS

Compatible with all FDM/FFF 3D printers

Zortrax Apoller can smooth models printed on all FDM, FFF, LPD, and LPD Plus 3D printers. The device is compatible with filaments based on ABS, HIPS, and ASA, regardless of their manufacturer.

Caratteristiche del dispositivo:

  • camera di livellamento 300x250x250 mm
  • Tecnologia SVS di Zortrax
  • Compatibilità MEK e acetone
  • Interfaccia tattile intuitiva
  • Connettività Wi-Fi ed Ethernet
  • Compatibilità con Z-ABS, Z-ULTRAT, Z-ULTRAT Plus, Z-ASA Pro e Z-HIPS
  • Compatibilità con materiali esterni tra cui ABS, ASA e HIPS
  • Sistema avanzato di circolazione del vapore Sistemi di sicurezza conformi allo standard

Zortrax Apoller è un dispositivo intelligente che leviga automaticamente i modelli stampati in FDM 3D con butanone (MEK) o vapori di acetone per rimuovere gli strati visibili.


Compatible filaments: ABS, ASA, HIPS

Compatible solvents: Acetone, Butanone (MEK)

Compatible Zortrax filaments: Z-ABS, Z-HIPS, Z-ULTRAT, Z-ULTRAT Plus, Z-ASA Pro


Build volume 300 x 250 x 250 mm (11.8 x 9.8 x 9.8 in)
Connectivity Wi-Fi, Ethernet, USB
Operating system Android
Processor Quad Core
Touchscreen 4” IPS 800 x 480
Solvent compatibility Aceton, MEK
Available materials Z-ABS, Z-ULTRAT, Z-ULTRAT Plus, Z-ASA Pro, Z-HIPS
External materials ABS, ASA, HIPS


AC input 110 V ~ 13.6 A 50/60 Hz
Power supply parameters 24 V DC @ 14 A, 500 W
Maximum power consumption 1500 W

Weight and physical dimensions

Device (W x D x H) 671 x 396 x 388 mm (26.4 x 15.6 x 15.3 in)
Internal dimensions 340 x 270 x 260 mm (13.4 x 10.6 x 10.2 in)
Device weight 30 kg (66 lb)


Maximum working temperature 90° C (194° F)
Minimum working temperature -20° C (-4° F)
Minimum absolute working pressure 0.4 bar
Ambient operation temperature 15 – 30° C (59 – 86° F)
Storage temperature 0 – 35° C (32 – 95° F)

Additional information

***All information contained in this brochure and specification is subject to change without notice.

Vacuum system

The vacuum system in Zortrax Apoller prevents the pressure inside the smoothing chamber from getting higher than the pressure outside of it even after the solvent has been vaporized. That’s why the vapors are kept inside the chamber instead of being pushed out of it.

Advanced vapors’ circulation
and condensation system

The vapors in the Zortrax Apoller smoothing chamber ar circulated upward to evenly cover the models. Fragile and intricate details are covered with less solvent to keep their shape intact. Once it’s done, the condensation system retrieves the excessive solvent that can be reused.

Advanced safety system

Due to redundancy carefully engineered into the system, Zortrax Apoller offers industrial-class reliability. The device is double sealed off from the environment. At all times the pressure inside the smoothing chamber is kept below the pressure in the room. Besides double seals, this is yet another level of redundancy in the safety system preventing fumes from getting out of the smoothing chamber. It also keeps the chamber closed even when there is a power outage causing its electromagnetic lock to shut down. When the power backs on, Zortrax Apoller automatically decontaminates the chamber before allowing anyone to open it.